These first two items from MicroMark we find indespensible on the work bench!

Quality Enginering: Dual ball-bearing spindle precision mounted inside a rugged cast aluminum frame

Small Size-big performance! Footprint (the base) is a mere 5"x 9"

Quality Enginering: High torque motor will drill a 1/4 inch hole through 1/4 inch brass plate. Spindle speeds are 2100, 4500 & 6500rpm.

Deep Throat: With a 5.5" throat you can drill materials up to 11" wide!

Features a conventional 1/4" 3-jaw keyed chuck. It can hold micro sized shanks down to down to a #80 bit! They don't get any smaller than that!

An extremely compact "combo" shear that not only cuts metal but also "box brakes" sheet metal to make your own custom sized enclosures to fit your circuit board projects.

  • Cuts PCB up to .064", brass & aluminum up to .040" and galvanized steel plate up to .020" thick!

  • Vertical table design cuts materials on the up-stroke and box-brakes into the "V" black on the down stroke

  • Four sharpened cutting edges for long life

Download our special instruction sheet for making your own 2-piece interlocking enclosures using this shear.

Click on the image below to open the '.pdf' file to be printed.

NOTE: The unit will "brake" (bend metal) up to 8" wide, however, the shear portion at the top of the unit needs a simple modification in order to cut material to a full 8" width. The modification is simple. It only requires putting a thin spacer under the four-bolt "cutting head" on top of the unit. The manufacturer inadvertantly added a lip to the mold that reduced the overall cutting width. This modification corrects this error.

"Hardware"
This is a collection of products that we've found we can't live without. Each sold by their respective brand names or dealers so you won't find these on our shopping cart.

This list will be expanded as we find new support toys for our PCB fabrication technique.