Dealer Enquiries Invited
Aircraft GRAPHICS & TEXT... anytime!

DecalPRO is used by...

• Aircraft BUILDERS
• Aircraft REFURBISHERS
• Aircraft DETAILERS
• Aircraft UPHOLSTERERS, and
• AVIONICS Shops...

... for adding text, nomenclature, placards and graphics to basically any rigid surface inside or out of the aircraft.

Notice at the bottom of this particular panel where the customer used DecalPRO® for identifying the row of switches at the bottom. The Text was simply printed out on a laser printer then converted from regular black toner to pure white with one of the special foils, converted into a dry-transfer graphic and applied to the panel. There is no residue, carrier or any other marks making it very difficult to tell the difference between a factory printed panel and one made with the inexpensive DecalPRO® system. You will love it our your money back!

Take a quick peek at these two images side by side (below) that we captured at the 2007 Sun 'n Fun. Why would a builder who has just spend a small fortune fabricating a beautiful flying machine stop short of a beautiful looking panel that is constantly being looked at? We figure it can only be one of two reasons - one of which make no sense to us at all.

A) The builder didn't want to spend any more TIME or MONEY ... or,
B) The builder didn't know about DecalPRO®
Prior to the development of DecalPRO it was too expensive and time consuming of a job to do, so out would come the hand-held tape labeler and the panel is done - like it or not! That's a real shame to see this. The entire DecalPRO® kit INCLUDING the required laminating device is only $159.90! That's not a lot of money spent on making your hardware look as beautiful as it should. Woudn't you agree?

Here are the typical "P-Touch" type labels we've seen in so many "Experimentals". Compare these 2 images below to the ones below. Click on the photos and then again to enlarge them up to proper size.

Within the EAA, AEA and aircraft upholstery communities, DecalPRO® is most widely used during the initial build of the control panel or later when when avionics and other control switches are updated or part of a complete "makeover" of the cockpit. This process enables the "end user" (you) to be able to create and maintain the same aesthetics of the panel with respect to the original color, size and font originally used.

(Click to enlarge images below)

CLICK on these two pictures to enlarge. This panel maker wanted pure white nomenclature for his switch and placard labeling. What's very interesting here is that these grapics are actually black toner made from an ordinary laser printer. One of the specialty foils in the DecalPRO® kit is white. You literally convert black toner into pure white images. This is a first in anybody's book for easy Do-It-Yourself dry-transfer graphics. The important thing to remember here is that when you make your own images with our system, there is no 'residue' or permanent carrier in, around or on top of the graphic! It's a REAL pressure sensitive, dry-transfer image. This capability has never existed before for the end user to be able to make in under 10 minutes.

• AIRCRAFT BUILDERS: ...freedom to stylize your main control panel any way you wish using any font, size and color right from your home computer before the panel is installed.

• AVIONICS SHOPS: ... ever have customers who ask, "Say, since you're working on my panel, can you make a few changes for me before you button it back up?" Service your customers requests for re-marking on all avionics repairs, changes or upgrades. This sort of "professional flair separates you from the other avionics shops that don't do this for their customers.

• UPHOLSTERY SHOPS: ... ever wanted to be able to complete your jobs without interruption or long waits for outside vendors to create insert plates? This new capability to create professional looking text and graphic finishing touches makes everyone's life a little bit easier and helps protect your "bottom line".

DecalPRO® allows you to do what you have never been able to do before. It's now graphics and text "on demand" from your standard PC or Mac computer with any laser printer and do it all in under 10 minutes.

DecalPRO® was developed and introduced on the market as a tool to help you achieve results that have never been available before without special equipment. You have at your disposal, some fascinating new capabilities we think you'll get a kick out of.

The rest of the website will give you more information on how it all works. We suggest you start with the OVERVIEW button above and work you way down the menu list. The last section labeled "LIBRARY" is where we are constantly adding new tips, tricks and techniques as they are developed and improved upon which come not only from us but also from our users. This last section is your "dedicated" info-central for DecalPRO®. We are much more than just the initial sale. We're with you the entire way to assist you with any problem you might run into through investigating new ideas to turn into new techniques.