Here are two products from MicroMark that we find indespensible on the work bench.

Quality Enginering: Dual ball-bearing spindle precision mounted inside a rugged cast aluminum frame

Small Size-big performance! Footprint (the base) is a mere 5"x 9"

Quality Enginering: High torque motor will drill a 1/4 inch hole through 1/4 inch brass plate. Spindle speeds are 2100, 4500 & 6500rpm.

Deep Throat: With a 5.5" throat you can drill materials up to 11" wide!

Doubles as an "arbor" press to form (roll) eyelets for making very quick and efficient Plated Through Holes. For eyelets and mating forming tools, contact "www.internationaleyelets.com"

Features a conventional 1/4" 3-jaw keyed chuck. It can hold micro sized shanks down to down to a #80 bit!.
An extremely compact "combo" shear that not only cuts metal but also "box brakes" sheet metal to make your own custom sized enclosures to fit your circuit board projects.

Download our special instruction sheet for making your own 2-piece interlocking enclosures using this shear.

Click on the image below to open the '.pdf' file to be printed.

• Cuts PCB up to .064", brass & aluminum up to .040" and galvanized steel plate up to .020" thick!

• Vertical table design cuts materials on the up-stroke and box-brakes into the "V" black on the down stroke

• Four sharpened cutting edges for long life

NOTE: The unit will "brake" (bend metal) up to 8" wide, however, the shear portion at the top of the unit needs a simple modification in order to cut material to a full 8" width.

The modification is simple. It only requires putting a thin spacer under the four-bolt "cutting head" on top of the unit. The manufacturer inadvertantly added a lip to the mold that reduced the overall cutting width. This modification corrects this error.